Untitled Document

	Microminiature type (L:12.0mm × W:7.2mm × H:13.5mm)
	Two kinds of contact arrangements are provided as 1 Form C and 2 × 1 Form C for controlling the direction of motor rotation.
	High capacity * Employs highly conductive material, sufficient cross area of conductor and heat radiant design capable of 25A switching current
	Over current protection * In case of over current, contacts are designed to open automatically during overload conditions.

Part No.	Rated Voltage	Coil Resistance(±10%)	Pull-in Voltage	Drop-out Voltage
TE1	12VDC	160Ω	6.5V	0.8V
TE2	12VDC	160Ω	6.5V	0.8V
Rated at 20℃ ambient temperature

External Dimensions

ITEM		SPECIFICATION
Contact Arrangement		TE1 : 1 Form C	TE2 : 2 × 1 Form C (H-bridge)
Contact Material		AgSnO₂
Rated Load		25A at 14VDC Motor Load / Locked Rotor
Contact Resistance		Max. 50MΩ (at 6VDC 1A voltage drop method)
Max. Switching Current		30A
Max. Carrying Current		25A for 2minutes at 20℃
Dielectric Strength		500VAC for 1minute (between coil and contact)
		500VAC for 1minute (between open contacts)
Insulation Resistance		Min. 100MΩ (at 500VDC)
Operate Time		Max. 10ms (at rated voltage)
Release Time		Max. 10ms (at rated voltage)
Shock	False Operation	Min. 10G (shock wave 11ms)
	Endurance	Min. 100G (shock wave 11ms)
Vibration	False Operation	10 to 500㎐ 4.4G
	Endurance	10 to 500㎐ 4.4G
Mechanical Life		10×10⁶ Operations (switching frequency 300 cycles/minute)
Electrical Life		0.1×10⁶ Operations at rated load (on:0.5sec/off:9.5sec)
Ambient Temperature		-40℃ to ＋85℃, 85%RH or less
Weight		TE1 : Approx. 3.2g	TE2 : Approx. 6.3g